VOLTEC 2500W 12V to 220V Inverter – Pure Sine Wave with RCD

VOLTEC 2500W 12V to 220V Inverter – Pure Sine Wave with RCD converts 12V DC battery power to 220V AC with a nominal rating of 2500W. It is part of Eshraq’s VOLTEC inverter range and is intended for mobile, backup and battery-powered AC applications when the battery bank, cabling and protection are correctly sized for the load.

Confirmed Product Data

Why Pure Sine Wave?

Pure sine wave output more closely resembles conventional AC power and is generally the preferred option for sensitive electronics, selected motors and equipment that may be affected by waveform quality. Always verify the actual running load and starting current before selecting inverter capacity.

RCD Protection

This version is listed with RCD protection in the product specification. An RCD does not replace correct grounding, protective devices or proper electrical design for the installation.

Typical Applications

• Vehicles, travel and camping.
• Operating AC equipment from a DC battery system within the inverter rating.
• Backup and remote applications where direct AC supply is unavailable.
• Mobile power systems with correctly selected batteries and protection.

Before Selecting the Inverter

• Calculate the total continuous load that may operate at the same time.
• Check starting or surge requirements for refrigerators, pumps and motor loads.
• Confirm that the battery bank voltage is exactly 12V.
• Use appropriately sized DC cables and protective fuse/breaker devices for the actual current and cable length.
• Maintain adequate ventilation and never block cooling openings.
• Review the attached datasheet before final project approval.

Technical Document

Download Data Sheet – VOLTEC 2500W 12V

This page intentionally uses only confirmed product data from the product identity, inventory and linked documentation. Additional values such as efficiency, shutdown-voltage range, no-load current and surge capability should be verified from the datasheet for the supplied batch.