VOLTEC 1000W 12V to 220V Inverter – Modified Sine Wave converts 12V DC battery power to 220V AC with a nominal rating of 1000W. It is part of Eshraq’s VOLTEC inverter range and is intended for mobile, backup and battery-powered AC applications when the battery bank, cabling and protection are correctly sized for the load.
Confirmed Product Data
| Brand | VOLTEC |
| Nominal power | 1000W |
| DC input | 12V |
| AC output | 220V |
| Waveform | Modified Sine Wave |
| RCD | Not listed for this version |
Important Note About Modified Sine Wave
This model uses modified sine wave output. It is suitable for loads that tolerate this waveform, while sensitive electronics and some motor-driven equipment may require a pure sine wave inverter. Check the appliance requirements before use.
Typical Applications
- Vehicles, travel and camping.
- Operating AC equipment from a DC battery system within the inverter rating.
- Backup and remote applications where direct AC supply is unavailable.
- Mobile power systems with correctly selected batteries and protection.
Before Selecting the Inverter
- Calculate the total continuous load that may operate at the same time.
- Check starting or surge requirements for refrigerators, pumps and motor loads.
- Confirm that the battery bank voltage is exactly 12V.
- Use appropriately sized DC cables and protective fuse/breaker devices for the actual current and cable length.
- Maintain adequate ventilation and never block cooling openings.
- Review the attached datasheet before final project approval.
Technical Document
Download Data Sheet – VOLTEC 1000W 12V
This page intentionally uses only confirmed product data from the product identity, inventory and linked documentation. Additional values such as efficiency, shutdown-voltage range, no-load current and surge capability should be verified from the datasheet for the supplied batch.
Reviews
There are no reviews yet.